SO, another "challenge". I have a GE Suprebase that I waned the clarifier unlocked. I followed the method posted on Secret CB Volume 10.
1)Solder a wire on the unused side of the clarifier , the other end goes to the emitter of Q216 (9 volt source)
2)Cut R-221
3) Remove D-204 and replace with a jumper wire.
4)Cut R-205
I did not cut R-221 or R-205. I desoldered one leg and lifted it out from its hole. I have 8.77VDC at the wire run to the clariier.
When this mod was complete the...
GE Superbase clarifier unlock
1)Solder a wire on the unused side of the clarifier , the other end goes to the emitter of Q216 (9 volt source)
2)Cut R-221
3) Remove D-204 and replace with a jumper wire.
4)Cut R-205
I did not cut R-221 or R-205. I desoldered one leg and lifted it out from its hole. I have 8.77VDC at the wire run to the clariier.
When this mod was complete the...
GE Superbase clarifier unlock