Anytone 5555 Crt 6900
Has anyone had luck making the display meaning the entire display have some kind of dimming wire or where the power comes from. I’ve had the 5555 and the 6900. The entire display is just too bright all...
View ArticleAnyone help with bleeding
Not sure about this hopefully someone can get me some insight the kids say when they have there Xbox on with their headsets i am coming through them really dont wanna add stuff to their headsets to try...
View ArticleEmperor 5010 (Nomad)
Chris, what do you think, I have a 5010 / Lincoln that puts out too many watts (even adjusted internally) and doesn't have "CB Dynamics". Don't get me wrong, the radio TALKS but it has too many watts...
View Articleemperor ts-5010 and messenger 4v can anyone tell me why my emperor quit...
ts-5010 was working great then all of sudden my meter stopped moving on rf,swr,cal but mod bangs needle out need help anyone have any ideas how to fix are maybe i sell it r trade it i also have a...
View ArticleCitronics Catalog '68
I ran across an old Citronics catalog from 1968. As you can see, it's crudely made, but at least it has pictures (I bought from a distributor in Boston around that time and they only supplied 6...
View ArticleDoc's Electronics in Buffalo,NY.
Has anyone on the forum sent a radio for repair or improvements to Doc recently?
View ArticleClik here to view.
One of the funniest CB "eyeball" stories I've ever heard
Fred in the Shed tells a hilarious tale about a CB hook-up that went horribly wrong...
View ArticleCobra 148gtl/2000 mb8719 pin13 channel mod For 41-44
Is this an ok mod to do? Cutting the trace and adding a switch? If using pin 13 for channels 41-44 the channels come up on these channels. Chnl. 33-41 Chnl. 34-42 Chnl. 35-43 Chnl. 36-44 When using pin...
View ArticleMirage 36hp3
Just thought I'd throw this question out there. So the new 36hp3's all have a clipped resistor in the j4 location. I'm guessing it was done from the factory but why? Has anyone else stumbled into this...
View ArticlePLL question
so I figured since so many knowledgeable individuals are on here someone might be able to enlighten me on how a PLL works. Let’s use a President Madison I guess as an example. So as someone that...
View ArticleQSLing 11 Meter contacts
Just started in October, have been mailing cards for about a month now. Finally starting to get some emails letting me know they’re arriving. I picture my letters in a half torn burlap sack being...
View ArticleAlignment Tools
Can anyone tell me where to get a decent set of the 2 or 3 tools that are made for adjusting the alignment points on most cb's? The cheap plastic tools that I got from Fair Radio only last for a few...
View ArticleCarrier or modulation
Saw this over at amfone... Interesting subject "So imagine this: a transmitter capable of say, 600w carrier, but only enough modulator to hit 60-70% modulation vs. a transmitter capable of say, 250w...
View Articletram titan 4 rx vfo problem
the titan when I spot tune the rx I got to go backwards on the vfo to tune it in I tested most of the transistor and tested good I got radio cheap but someone worked on it before I got it its got a lot...
View ArticleTrc 449 no transmit
Got a decent looking trc 449 but no transmit at all. I replaced the relay with one from a working radio, and nothing not even a peep. Tried another mic, nothing. I manually keyed the relay and it does...
View ArticleRealistic TRC-57 Schematic ?
Anyone? Sure I found evilpay and other pay sites but thought I'd ask. CBT hat the manual but no hieroglyphics. Thank You ...
View ArticleEliminating Start-up Tone
In reference to the Stryker 447HPC2. Is there a procedure to eliminate the start-up tone?
View ArticleGalaxy DX2547
This is an update on the Galaxy DX 2547 meter light problem. If interested, you can read the thread here: Link. It had the title of “Hello” so I’m posting the update here under Galaxy for more...
View ArticlePearce Simpson Simba SSB 23 Channel
I am having a couple of issues with this radio. 1) ... SSB power output has decreased from 14 watts down to 8 ~ 10 watts and I cannot pin point why. Adjusting the ALC pot does not increase SSB above...
View Article