Direct injected galaxy DX55V wattage problems
I have 2 direct injected galaxy 55v's one is mine the others a friends, I had made a 33hml direct inject and used it for awhile for this same friend and when hooked up to his desktop computer the radio...
View ArticleQuestion on finding RF power transistors....
First off, I understand the idea of parts sources being a "dear thing"! If nobody answers .... I'll understand!!!! So let's say I have a radio and it needs a driver and a final. For the driver, SAMS...
View ArticleTube Radio- Courier Royale vs Cobra Cam 88
I bought a Courier Royale recently. I have a Cobra Cam 88 for a while. I was curious about the Courier as it has a mechanical filter in the receiver section. The mechanical filter was an expensive...
View ArticleHelping the cb revival along
I think that cb is making a comeback. I think one of the things we need to do is help it along a little. I have been talking friends up about cb radio, how happy I am back on the air, but how there...
View ArticleClik here to view.
Sanyo RP-8880 repair?
Hi everyone. NewB here. I have a Sanyo RP-8880 SW receiver that is dead on all the SW bands SW-1 through SW-5. It does seems to receive AM (MW), MB, LW fine. FM works too but tuning meter does not...
View Articlechinese made cobra cb radios?
Hey everybody, I've got a pretty basic question I hope you can help me out with. I've never had a CB and I'm looking to get one. I found a few local units, Cobra 29 and 148. Both are nightwatch. For...
View ArticleAnybody use switching power supplies?
I know that I have seen tons of videos where people run their radios from old/used PC server switching power supplies. A lot of people say they don't see a noise problem, some say they do. have any of...
View ArticleBroken down.
Robyn 23 channel base mobile question, When I turn it on then try to hook up antenna it sparks fire at the antenna connection why any help will b appreciated, also the fuse in side of it is not there.
View ArticleInternational Crystal Co Executive CB Radio
Anyone have operating instructions, owners manual and or a schematic for this radio
View ArticleReceive interference on dual conversion receivers only?
Ever since putting my antenna higher up in the air a few months back, after having no antenna up for at least two months prior to that, i have had a solid S-4 noise floor 24 hours a day 7 days a week....
View ArticleCant find a radio repair person anywhere
I have a 148gtl new in the box that just needs a minor repair and i cant find a person to repair it anywhere. The few qualified people i found wont take any business because thay are backed up for...
View Article2547
Anyone have a wiring diagram to wire a astatic 575 my to a galaxy 2547 ,thanks in advance.
View ArticleSwing or no swing
I have saw alot of explanation about having a low deadkey for driving an amp. What about when not running an amp. Should the deadkey be set to close to the max watts that the radio is capable of ? I...
View ArticleClik here to view.
looking for info on this channel read out
does anybody know where you can buy this part to cover the channel display to digital readout ?? thanks
View ArticleMagnum Raptor modulation help
I have a Magnum Raptor that I got from eBay. It works ok on everything but the high carrier and high peak settings. Recieve is good and low power works good. But when switched to high carrier and peak,...
View ArticleVoyager 33 CW radio - what can you tell me about it?
I picked this up today as part of a package deal along with some other radios. I don't plan to keep and am considering selling. While it works, I discovered it transmits from 26.515-26.955, or just...
View ArticleCobra 2000 GTL Very LOW RF output problem
I purchased this Cobra 2000 GTL on eBay as a parts radio. I know...I know...lol. It is made in Taiwan and the board number is PC-497AB. Initially the radio would only transmit very low on both AM and...
View ArticleCobra 1000 warble sound on transmit @ full power
Hi Everyone, I have a Cobra 1000 on the bench that has a warble sound when transmitting at full power. During the alignment, if I back the power down to under 2 watts the carrier is clear and looks...
View ArticleAmp feed back and high swr at radio
This is a “600Hd base unit”...using HG2879c pills. Driven by a Stryker 955 problem... I get feed back to the radio receive when I unkey and swr is in the 2.8-3 range on the radio face...verified with a...
View ArticleNew Microphone Driver Extreme DX656
Found this while surfing around. Wondered if anyone has one or knows someone running one and of course, how do they sound? The online price I found you could buy two SRA-198 Mics of the cost of this...
View Article