In need of Sam,s Manual #89,,Robyn DG-30
Hello, can I get a copy of the Sam,s #89, Robyn DG-30 CB, I have one here I found in my Father's closet, and I need to tune it up, it is off. This radio is in super shape, 23 channel, but I think it...
View ArticleCobra 148GTL This issue has me stumped
Hey guys, I have an interesting one for you. I've never gotten a radio with this fault before and frankly it's driving me nuts. I have a Cobra 148 that after aligning everything, side band is always...
View ArticleOld President Grant same cobra 138XLR and Trc449 odd problem not sure where...
There is no Sam's on this radio but there is one for the TRC 449 and 138XLR and a TRC 449 service manual. My notes are sketchy. This has been a work in progress for several years. I had removed the...
View ArticleClik here to view.
JCD-201-M
Has any one wired this mic to a anytone 6666 or COBRA 4pin mic. I need the color of the wire to pin only. Thanks
View ArticleSetting frequencies on a Cobra 29 LX BT, after Crystals replaced.
Hey, I am having frequencies issues with a Cobra 29 LX BT, I replaced the Crystals in the radio, the 10.695 was bad. Now I can get receive, but it is off frequency, can I get a process of how to go...
View ArticleCobra circuit boards
Can anybody tell me what board is in the Cobra 142 GTL? Is it the same as the 2000 and many of the export radios out there?
View ArticleBrake noise in radio
My buddy has a radio in his 2005 (i think) chevy pickup. Every time he steps on the brakes he gets a lot of hash noise in the radio. My guess is either anti-lock module or trailer brake controller. I...
View Article148gtl tx/rx light flickering
I scored a brand new unopened in the box cobra 148gtl, turned it on and aawwwww. It dont work. Receive is perfect, when you key the mic on am or ssb the rx/tx light flickers back and forth which gives...
View ArticleVintage CB - Magazines; Ad's, articles, cartoons, etc.
View attachment 43961 Some things never change.
View ArticleMikes repair videos
Anybody else miss seeing new videos from mike? It’s been a long time since mike posted a video. I wish he would start putting videos up. I always liked watching them
View ArticleRCI 2980 AM\FM RX
I have a RCI2980 EPT3600-14b board everything works, but I have no rx on am or fm but it tx on them, but its fine on ssb. Any ideas on what to check?
View ArticleFord Ranger roof mount
Putting a 2000 ranger extended cab back together after a collision, and looking at adding a radio to this rig. Planning my antenna instal and thinking about a center of the cab, fold down style mount....
View ArticleSBE Console V no modulation
Well one month to the day my beautiful SBE Console V decided to quit modulating. It shows a dead key of 5 watts on AM and as expected no carrier on SSB. When the mic is keyed I can say AUDIO, PEP reads...
View ArticleCobra 2000 gtl alignment
Hello guys trying to figure out these instruction: insert rf meter to antenna jack no modulation put radio in usb dynamike minimum. Check for rf how if no power in ssb ?
View ArticleSmokey 23 channel troubleshooting no tx/rx
I picked up this cb used with no mic. I was able to determine that it was wired for a Midland and everything worked except for there was no modulation. It would receive and transmit a carrier...
View ArticleGalaxy dx77HML no AM transmit but works on SSB
Been awhile since I've been on the Forum but I've been having an issue with my DX 77. Transmits fine on sideband but switch to AM and nothing at all no modulation no power. Same issue with my 95T. Thanks.
View Articledoesn't make sense to me
quick question so it seems both my 148 side mike Taiwan made and 200 gtl with the same mod from exit13 on a whistle, i see good watts 2 dead key forward to 7 but when adding audio it doesn't show the...
View ArticleCobra 2000 No voltage at Test points 7 and 8
There is no voltage at TP 7/8 posts. So therefore no voltage at final or driver. Trying to figure out where the disconnect is. Where does that 13 volts originate? Looks like maybe comes from mode...
View ArticleSubstitute for L44 Cobra 2000
Anyone have a clue if there is a viable alternative for L44 in my Cobra?? Mine is corroded and slightly damaged and causing lots of issues in the circuit. I don’t have an old radio to pull one from. Or...
View Article